Light dimensional ground in my work October 10, 2020 08:51

Here's the painting I finished yesterday that was painted over light dimensional ground. It worked as an experiment: I was able to apply three coats of cold wax to protect it, although I had to be careful not to let the wax build up in the creases of the painting. I did rub off two high points of the painting, because the ground is not as hard as the plain watercolor ground, but I was able to fix that easily by just painting on the exposed ground and waxing over it. So that's a win.

However, I think I chose very much the wrong approach with this painting. I put way too much detail into it for the amount of texture it has, so the texture gets lost in the detail. From now on, I will use far less detail in paintings with light dimensional ground. Instead, I will focus on large blocks of color with a few smaller ones here and there for color contrast. I think that will work much better and allow the texture to show to its best advantage. 

On this particular painting, I got very much distracted by the texture and followed it too much, which meant that the design of the paint got lost. I am just not pleased with it. I realized after seeing the work in progress in jpg form that I had way more straight lines and chunks of color than is normal for me. I generally use a lot of fluid lines and organic forms instead. I feel like although I began to put them in after I saw how blocky the shapes were that they look pasted on. They don't fit well, and that's what I don't like about the painting. 

Finally, I've been working with metallic watercolor paint from Daniel Smith, the Iridescent series. It doesn't show well in this photo, but the light areas are Iridescent Gold. I've been enjoying learning how to work with this stuff, but I was concerned that the cold wax at the end would dislodge the particles of the paint. I am happy to say that didn't happen. So I am going to move forward with using Copper and Silver. Just getting that link to insert here, I saw that DS actually has a bunch of other colors in the Iridescent line, and I am most definitely going to try them! I do love DS paints.

So all in all, I learned a lot from this painting. 

But I'm going to take a break from the dimensional ground and go back to the regular Daniel Smith Watercolor Ground. I want to work toward creating larger abstracts, but I also want to use up my supports, so the next two canvases (a couple of nice 16 x 20" Fredrix Pro Dixie with traditional profile) I have prepared with the DS ground. This stuff does show the texture of the brush used to apply it with (although I know there are ways around that), but I like that and it does not interfere with either my design or the application of cold wax. 

A nifty discovery October 2, 2020 18:41

The texture, though, is gorgeous, IMO, so even though too much texture can be a problem in itself, I really want to find a way to work with it. Because look at this-->  This is as good as texture I could get with impasto oil paint or acrylic, but no waiting several days for it to dry, no smells, and watercolor is easy cleanup. 

It does act differently than paper. It's very prone to lifting, which I am trying to work with instead of resisting it. And so far I have not seen it run the way some pigments do on paper with misting. That's something I will try on the next painting to see what happens.

Because of the easy lifting, it can be difficult to glaze, but glazing with dry brush is a cinch. You can see that I've used it with the light metallic paint here. What's really nice is getting the pigment caught in all the creases--just magical! And it feels a lot like happy accident time like when doing wet in wet. 

So I was all gung ho about this ground, having decided I could work around the excess texture issue, but there was also its price. A 4 oz jar is $11 + shipping and I used up 2/3s of it on those two small canvases. So I wrote to QoR and asked them if they were going to make larger sizes of the Light Dimensional Ground available.

They said that was especially marketed to watercolorists, but they had the same thing by another name: Golden's Light Molding Paste. And that comes in a 32 oz jar for $28. Heck, it comes in a bucket. Hell yeah!

I have plenty of supports lying around that I can apply this stuff to, ranging from 5 x 7" to 40 x 40" canvases and panels and boards. This stuff is so nice to spread with a palette knife too (finally I have a use for them other than mixing paint)--very sensual, like cake frosting. It is so nice not to have to worry about cutting paper to the right size to fit a standard frame and to produce works that can even hang as is, with not only no need for glazing but no need for a frame at all, if people want it (although I personally like a frame and feel like it does its job of protecting especially the corners of a support). 

So I've got a ton of this stuff now and am really looking forward to learning to work with it. 

Light Dimensional Ground on Canvas September 19, 2020 12:34

I got some of QoR's Light Dimensional Ground and applied it to a couple of 12 x 12" canvases I had sitting around. The stuff was easy to spread with a big palette knife, but I used up 2/3s of the little jar on two canvases. I don't know if I just used too much or what. I like oil paintings with a lot of texture, and I thought I might be able to capture that effect with this stuff, so I went to town. You can see the amount of texture I ended up with.

This stuff is not as smelly as the regular watercolor ground, but I still let it dry out in the hall during the day, and since we have hooligans coming into our building at night to fuck around, I took the canvases in and put them in my window to complete drying overnight. As long as it doesn't rain or freeze, I think that's going to be a good place to let stuff dry. 

Today I could hardly wait to try out these supports. One technique I use a lot in watercolor is apply some paint and then mist with a hair mister to get it to run and to encourage particles of pigment to settle in the texture of the paper. I find a hair mister works many times better than a regular sprayer. You can do tiny puffs of mist just where you want them or quickly mist the whole thing to encourage granulation. I was hoping that I could do that with this ground, but I wasn't sure, since I kept reading about how it was spongy. A spongy surface might just sop up the pigment and not allow it to run. In fact, at least one review said that. 

But that's not what happened with my paint. I used Daniel Smith's Green Apatite, Winsor Newtown's Prussian Blue, Daniel Smith's New Gamboge, and Winsor Orange. The apatite settled out a dark purplish brown color different from the green that dominates it. It fell into a lot of the creases and rumples and showed up as wonderful specks. It doesn't photograph well, but the photo above shows a detail. 

Here's the whole painting. When you get close to the support, it does have the look of grainy paper, but the texture reminds me of acrylic, like modeling paste. The paint isn't shiny in any way. It's completely matte. I didn't feel much of a difference between this and painting on CP except that it lifts much more easily. I tried using that to my advantage to create limbs and trees in the background, but they ended up being overworked. I also tried some highlights that way, but it looked like too-vigorous lifting. So I think I might try lifting and then painting another color over the lift area, like zinc. 

I'm not sure if I will add more to this. It might look better with some blue added, especially my beloved cobalt, but OTOH, I'm eager to go ahead and seal it with cold wax and see what happens. I asked the manufacturer if they thought it would be okay to use cold wax on this, because of the spongy thing. They said they didn't know but sounded kind of doubtful. That might be because no one has tried it yet. 

This stuff has a lot of possibilities, but I am not sure how much I am going to use it because it is pretty expensive in terms of how far it goes. They produce it only in a small 4 oz jar. :( However, it might be possible to use Golden's molding paste and then either use watercolor on it or spread some of the regular watercolor ground over it. 

However, I did just order some of Golden's Crackle Paste to try for texture as well. I didn't realize it could be used with watercolor, but on a hunch, I thought if light dimensional ground could be used that way, so might crackle paste. I can hardly wait to get my hands on it.

I am sensitive to acrylic, but I did okay with these grounds and I don't anticipate hovering over the stuff like I used to do with my paints. I will also allow the supports to dry out in the hall and/or in the window, so I think I will be okay.

I know some people might say, "Why are you trying to get texture with watercolor?" I know it's not "traditional," although in the 19th century, British watercolorists used aquapasto in their watercolors, which can produce low dimensionality with watercolors and is made from gum arabic and silica gel (that is treated in a way that makes it safe).  I've used that in the past. It can give you brushstrokes similar to a not-too-heavy Impressionist style. I still need to play with that more. 

But as for why insert texture into a watercolor painting, why not? There is no reason why oils and acrylics should get to have all the fun. Texture really expands watercolor and doesn't change its fundamental nature. 

Lots of possibilities!

Back to work September 11, 2020 16:32

I've been trying to consolidate all of the different things I do, from art to teaching classes in magic to growing plants to writing books. So I'm going to be posting here again instead of on Wordpress. Trying to keep everything closer to home and decrease the craziness. 

In terms of painting, I finally started exploring the watercolor ground I've had for the past couple of years. I applied some QoR Cold Press watercolor ground to a couple of small canvases I got from Blick to do oil experiments with. That was a year ago, and I didn't accomplish much with those experiments, but I found the unused canvases when I moved and sorted all my supports out so everything is in one place and I can find stuff.

I haven't been using my oils since I moved out of my studio back in I think it was November. It was just not an okay place for a studio. Maybe great for a sawmill, due to the noise, dust, flooding, and old lead paint falling out of the ceiling, but not for a painter. But once I was out of there, I didn't feel okay about using oils in my loft. It wasn't that I was using any solvents or other toxic stuff; I use just walnut oil with an occasional foray into walnut oil + alkyd. But the smell of oxidizing vegetable oil is not that pleasant and also I have cats. And cat hair and oil paints don't mix.

So I've been using my watercolors instead, and honestly although I do miss oils and want to get back to them eventually (I would like to move to a 1-2 BR apartment in a more convenient location in spring), I am really enjoying the challenge of watercolors. I forgot how much I love Daniel Smith's Primatek Colors (made out of rocks!) and all sorts of granulating pigments.

But I've also been missing the easy framing of an oil painting. For instance, my loft is plastered with many of my oil (and acrylic paintings), which can be hung without framing--just throw a wire on the back. I haven't even varnished most of them. 

But watercolors are another story. NONE of them are hanging on the walls because of the cost of framing them and because, frankly, I don't like framing behind glass. It is heavy and expensive and just aesthetically not the best, IMO.

So I've explored ways to seal watercolor paintings. One of them is just to spray them with acrylic + mineral spirits spray varnish. It works great but holy hell does it STINK. You HAVE to do it outside, even in the depths of winter, and it is, just as it smells, carcinogenic. No thank you cancer.

So instead, what I've been doing on and off with the watercolors is sealing them with Dorland's Cold Wax. This gives the colors a depth and richness plus protects the work from water. I use three coats, letting it dry thoroughly between each coat and then buffing with a soft cloth. It makes a nice satin sheen, really wonderful and not at all plasticky, like the spray varnishes can be. I have seen videos of people applying it with their fingers, but it does contain odorless mineral spirits (almost no smell), so I would not get this on my skin. I use a soft rag or a shop cloth to apply it. You can actually splash water on the thing when you are done and it will just bead up. You can pop your work into a regular frame with a foam backing and you are good to go. 

However, this does mean that some competitions will not allow you to enter your work as a watercolor. Instead, you enter it as "mixed media." That is fine with me. I have found that collectors do not seem to give a damn about medium. :) And if one or two watercolor societies don't allow it, well, I don't need to be part of that.

I still felt a bit weird about framing a piece on paper and I know that many people like to get a painting all ready to hang and furthermore, they just don't like works on paper. To many, if it ain't on a canvas, it ain't art. So I decided I would try the watercolor ground on canvas.

It is fabulous. I am still experimenting with it, in particular in terms of achieving some kind of granulation. But it is fab for lifting. I do think it sucks up paint. But so far I have only tried the QoR watercolor ground and not all the other brands and types.

I was concerned because in the past I had tried it and the cold wax seemed to make any use of titanium a bit dingy. But now that does not seem to be an issue. Also, I have tried going over the titanium with a thin layer of zinc and I don't see any dingyness.

I've got tons of canvases and panels from my oil and acrylic painting days, and I am going to cover them all with watercolor ground.

Next up, using the cold wax to finish these things.

I did contact QoR to ask them about whether they thought cold wax would work on their light dimensional ground, which is some cool stuff. It looks like it has really unusual capabilities with respect to watercolor. I can hardly wait to experiment with that. But they seemed a bit doubtful that cold wax would work with that particular ground, because it is a bit spongy, but I am looking forward to giving it a try. 

That said, you can do quite a bit of texture with the watercolor ground, as you can see from this photo of something I was messing around with. 

And of course, once you are done painting, you can seal the paintings on watercolor ground other than the light weight stuff with cold wax, and you have a painting that is ready to hang. I love it!